It was a cheap deal to buy Smok RPM 2 kit. It has a built-in 2000mAh battery, power 80W, variable watt mode, unprecedented capacity 7ml juice, fast ignition, USB-C recharging and 2 mesh coil option, which can be used for MTL or DTL atomization. Prism pod system is sold in Gold, Red, Blue Prism, Bright Black, Rainbow Prism and Prism Far Varnish.
RPM 2 overview
As the successor and Smok Smok RPM80 RPM40, Smok RPM 2 has an appearance very similar, but more portable, and has a start button larger and larger up / down buttons. In addition, the entire device is easier to operate, and the size is suitable for hand-held or pocket. Each RPM 2 kit includes the module and refill the ink cartridge with replaceable coil. The colors available are away Prism, Prism Rainbow, Bright Black, Prism Blue, Red and Gold Prism.
In addition, Smok RPM 2 uses a powerful 2000mAh internal battery to provide longer vape time, allowing vaping all day without recharging is required. In addition, the C-type charging port on the side of second RPM adopt a secure and stable connection to make the process safe and fast charging. Type-C interface is USB selection of the latest and most convenient because you can plug up or down, and outstanding efficiency, up to 100%. Built-in protection lithium / ion also can prevent overcharging, high current and short circuits, thus providing vape experience completely safe. The best part is that RPM 2 supports pass-through charging, which means you can continue to evaporate when plugging Pod Kit.
On the control panel of Smok RPM 2, you can see the large screen of 1.14 inches, and you can use an ergonomic up / down navigation keys. The menu has an indicator for data vape, such as current battery level, current power, output voltage, current resistance atomizer, a puff and puff number. Additionally, you can press the +/- buttons at the same time to get more detailed battery information, such as the withdrawal amount remaining before recharging. Please note that the rest of the suction volume is calculated based on the current power settings and constraints coils inside the pods.
Smok RPM 2 pods and rolls
A perfect match for the Mod is a pod with a powerful magnet to ensure that no matter how hard you shake RPM 2, they will not move or make a sound. With the e-liquid 7ml unprecedented capacity, each cartridge can hold 30% more than the previous RPM containers, thereby reducing charging every day. In addition, each cigarette holder RPM 2 is ergonomic and has a large oval aperture of 9.5mm x 5.6mm, with more air flow every time you puff. Liquid storage tanks are also translucent, which can better see the current internal electronic liquid level. To enter other fluids into the box, pull out the rubber plug from the side and pour your favorite vape juice into appropriately sized port. After recharging, it is important to wait 2 to 3 minutes to ensure that the cotton bobbin is fully saturated.
Smok RPM 2 has two new coil selection are on the lung or mouth into the lungs directly vape experience. DTL nozzle is 2 Mesh 0.16ohm RPM, which can generate a thick vapor, has a superb taste, and can work between 25 to 50 watts. Optimal setting for this coil is 40 watts. Alternatively, you might like RPM Mesh MTL 0.4ohm coil, which produces soft throat sound and satisfying flavor. You can use this coil with high nicotine e-liquid with a power of 25 watts.
Smok RPM 2 features and specs
An important aspect largely Smok RPM 2 Pod system is that it can be launched in the power range of 1 to 80 watts, and respond to pressing the launch button within 0.001 seconds, which is almost instantaneous. RPM 2 measures 28.5mm x 31mm x 108.5mm and weighs only 132 grams. In addition, the charging system operates with a charging current of 1.4 amperes. For more detailed specifications, you can see the infographic below.
In the box
By buying Smok RPM 2, you will receive the RPM 2 equipment, pod pre-installed with 0.16ohm mesh coil, pod pre-installed with 0.4ohm coil, C-type cable and manual. Please note that according to regulations, RPM 2 version of the EU will send a container 2 mL instead of 8ml.
Learn more below: