The vapeciga Voopoo Drag 2 Platinumis the last and so I know the first companies VAPE RTA popular Voopoo. He lost some popularity in recent times and in 2018 was only a year that was fine. Bit up and down with some setbacks as giant pandas and shoot 2, but made a very good mini-slip very good and very underrated Pericles RDA. The Rimfire was published in 2018, so I’m a little here LTTP. Rimfire RTA is 26 mm diameter double coil RTA with airflow is channeled to the top down. It is available in 4 colors black, red, gold and silver. Elementvape they have in the United States at 31.95 all colors except black in stock.
base diameter 26 mm
30 mm at the widest point
5 ml maximum juice
Top 304 stainless steel construction
Pyrex glass bulb strengthening
USER-Postless four terminals construction platform
single or double coil configuration
positive after isolated PEEK
Ports wide evacuation
E-liquid adjustable control
Dual control slots Top Airflow – 12 mm with 1.75 mm slot
screw system top-Fill
810 Bore width 9 mm Tip drip Resin
Gold plated 510 Pine Center
Available in gold, black, red, stainless
Included in the box:
1 Rimfire RTA
1 replacement glass tubes
1 T-tool screwdriver
Prefabricated Coils 2
1 organic cotton
1 Parts bag
1 User’s Manual
When RTA must say I like the design. RTA know little higher airflow to the trend in 2018 for extra protection against leakage, but unfortunately many of them were injured. So when I see the design of it, I think it might be a good choice, at least. Unfortunately it did not last long after my first building, but we will get into later. Overall though I like that from the beginning though.
Build bridges and capillarity (photos above)
Let us now build a platform. This is a fairly standard which is my favorite Voopoo Vinci X show new, but it also means you need to pre-cut your prospects. It is roughly the same platform or coil Kylin art construction wise witch V2 V2. I think most people have seen the postless bridge at that time. What you have is a tool that many others have done. Many companies that include some type of coil guide today to make a roll of pre-cut easily, but do not have rimfire percussion. Personally, I felt better than 5 mm lead so it would be the way to go and you can even go a bit shorter if you want to about 4 mm. There are four holes poles each branch gets its own hole as it should and the coil can be installed at once. cover screws hex head larva good that I personally like, but there was no problem with flathead here. amounts of screws are unscrewed the lining RESULT wire is not bent when installed and works very well for flat wire coil round and smooth. Overall a nice easy to build the bridge but the cutter wire coil would
Mecha is very easy. The JFC (control flow of juice) are rare these days, but very popular in the shaft hole 2017. large enough and can actually their stuff and will have to because of my disability would bring later. It is very difficult to assess the effectiveness of the shaft, but due to disability.
Regarding performance, the use as a double coil RTA as planned. You can build a single coil in this if you for some reason, anyway, but often RTA dual coil runs on a single coil is not very good, so I do not know. I found two builds up. 1 built luxury 3 mm ID and a unique design in round 4 mm ID. DTL and is spacious enough, perhaps a bit limited compared to some, but DTL complete vaporizer. I will run, but frustrating to use very difficult to control. Even if it’s brilliant performance. Not much air in multiple RTA as most single coil but used two rabbits Zeus and Themis die and was easily defeated les 3 flavorwise.
general impressions, details and extras
Is a high airflow down with 2 large holes RTA equidistant air can be adjusted from outside. nice and smooth AFC and cover. It can easily be adapted or off mod and have several models for a handle. Very good. looking a bit difficult, turbulent and not very subtle, but not bad. It would be very hard when it was closed and when it closes after half of the way to start a small whistle. The top of the filling is standard filling screw that’s just my favorite and there are 2 holes filled with good size to demand all kinds of bottles. It is very slippery, but not so easy to lose. Nor it is full of threads, but double as the style in which only a swing is needed.
Now, on disability, I talked to that I really killed Voopoo Too 180w Tc Box Mod get code. As many screws RTA separated into several pieces. All other RTA although the use of “righty tighty lefty loosey” mantra, ie clockwise to tighten. With Rimfire but there is a room in the middle of the reverse thread. This means that when the hat together (including control of air flow) are pressed to the left. So what happens in this RTA it is when you wear a hat to complete, or screws mod, or try to close the JFC actually loosens all RTA. Just install the mod or filler for me is enough to loosen the RTA to the point where the glass is more comfortable and can freely spinned and as we all know, you can make your flight RTA. Try tightening the backup will either open the lid of his first mod or start unscrewing the base. It is an endless cycle of frustration needs “right” to do all the time and you have to be careful filling. I consider this a flaw important design makes everything RTA useless for me.
I there are plenty of accessories that come with it, I found a 810 resin advanced drip friction in standard form (color varies with the color of choice, I have a red tip is a mixture of red and blue), but no no adapter 510 or tip replacement. Droplets end of a good fit. Not too comfortable, but not too loose and you can use your own limbs 810 and 510. It’s a bit disappointing, but not get replacement tip or 510. Vine adapter with 2 tanks, and both the tank bubble glass . RTA itself is 26 mm at the base, but protuberances 30 mm tanks. PDT version does not have a bubble tank just two regular tanks. Is a very good capacity of 5 ml. The Voopoo Rimfire RTA also includes many additional O-ring, 4 after replacing screws (all headless flat head), 1 tri tools and two coils 1 cotton entered mine. Coils unfortunately is not marked at all, so there ding them. They had merged Claptons air.
Vapeciga Voopoo Drag Manual good overall quality. AFC is very good and put it on top of the filling good, but some texture or knurling on the upper deck will be easier to open the lid. Screw after good quality too. Overall it was quite easy to remove, but unfortunately too easy to intermediate components that reverse threaded.
Let’s talk about current air flow. Kennedy style is an air flow down two tubes with air flow on each side. I’m sure most are familiar with the airflow at the time of Kennedy. It is also used in the tsunami RDA, but you can not think of a place, and was there a few years ago. The only strange thing is that even the top of the tube for several reasons. tube air flow on the left side of the coil is slightly higher than the right. I do not know why and it’s no big deal, but something I noticed what I have to prove it. easily adjust the airflow. Simply turn the top cover and O-rings are sized to make it easy to do. The hat is also locked in place, but completely closed in both positions. It would be great if locked in a fully open and fully closed operation, but not great. It is easy to adjust the MoD, but can not compensate mod. Very well done out there. O-ring top cover is good and easy to pop. It is so easy to install and fasten your mod.
It comes with a standard resin tip dropwise 1.810 friction. 810 additional tips fit both in the form of friction and O-ring. They also include 510 adapter so you can use almost all the ends of the drops of the GDR. I would like to have included a supplement if, as is now the norm now to include two drip tips RDA. Drop drip tip excellently in the RDA. comfortable, not loose, not tight. Pericles quality Voopoo a very good RDA. O-ring on the top cover to the base of the right shades and a hat is tight, but not tight. It is easy to disassemble easily. AFC easy to customize, simply adjust ring seal and everything is done well. The top of the lid is not locked into place so it is easy to put on and remove mods. Screw after an excellent quality and and 4 parts including screws (2 long 2 short), all flathead screws. It comes with a standard 510-pin and 510-pin DDR BF as the majority today and both are gold plated.
The juice is also a good size. Not huge, but big enough. Squonk protection of drops pretty good protection. The decrease in airflow is high enough that this poses no problem when dripping or leaking squonking. Just use as a dropper currently working on a review of all Squonk mods but I put in the Squonk mod just to test very fast and worked well. As releasable drip drip drip until the end without removing the top cover.
This is a diameter of 24 mm (technically 24.2) so it does not harm most mods on the market today. Accessories wise, there are a lot of rings together parts and 4 screws parts (2 of each size) for it are presented, but not clamping parts, screwdriver, hex wrench, 1510 end of the adapter, two coils, cotton and only one drop point. Both the number of accessories as a whole. All that was missing was to additional drops and tweezers. The reel is not marked, but disappointing and blew her nose for it. Integrated air had Claptons ID 3mm 5 laps with my predictions, but no label materials. Manufacturers must always include a metal tag complete specification used in the coil is included. The brand is very simple and good. Only a Voopoo Pnp Replacement Coils click in at the bottom of the top on each side between the two holes airflow lid. Well there and is recorded in the corresponding color to be not too out.
I received a nice bright red color. These 26 mm diameter RTA just stand with 5 ml of 30 mm glass bubble so you should not overlook the most mods. 5 ml capacity is good for a double coil RTA, but not great. Remains fairly standard in these days, but missed a double coil RTA if the capacity of 7-8 ml. JFC and will work when you open the lid of the tank when you try to use it. The brand is nice and simple. Only voopoo logo and logo rimfire on the part visible through the glass, like most RTA
5 deposit bubbles included ml (only tanks bubbles)
many spare seals rings and screws 4 after replacing
AFC nice soft
single screw above the design filling
easy to pin / Construction
capacity of 5 ml with good bubble tank
a good sense of RTA in the airflow
colors (4 in total)
Reverse threaded center section
fort airflow and noncurrent
only one end of the fall and no adapter
Including coils was not clearly labeled
coil not lead cutters
So with all that said, I recommend the RTA? I do not like so hard or not, this, I will be heavy leaning toward no. It’s a shame too, but as a major design flaw RTA died for me. Beyond whether it was the best performance in airflow RTA I’v used, but the way is too great to ignore a failure. I will not add to my resume CER link below.
It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.
You can buy here: Voopoo Drag Nano https://www.vapeciga.com/collections/voopoo